Call 415-761-1111

Every step, perfected.

Five steps. Each one has a reason, and each one is ours.

On-site visit

We walk the space with you before anything is drawn.

Most problems with a staircase start with something nobody looked at. We check the opening, the framing, the floor, and how you'll live around it.

Measuring

Your space is LiDAR-scanned to the millimeter, then measured again before production.

  • We scan the whole room with a Leica LiDAR scanner, accurate to a few millimeters.

  • Your stair and railing are modeled into the scan, so you see exactly how they fit.

  • The drawings come from the scan, not from a tape measure.

  • Every scan is kept, so if anything changes on site, we know by the millimeter.

  • The scanner is a Leica BLK360. It captures a room in under 20 seconds, accurate to about 4 mm at 10 meters.

Design

Your stair is drawn into your rooms, so you see it before you choose.

You get drawings of your stair in your actual space. Change anything before a single part is ordered.

Procurement

We tested the makers and chose one. Every part is engineered, finished and tracked.

Engineered to your measurements, stamped for your permit, and every part arrives finished. We don't fabricate, so we're never selling you our own product.

Why we chose our partner

Installation

Our own crew, trained on these systems. We never subcontract.

The crew that measured your space installs it. One to three days, floors protected, site left clean, and one number to call afterward.